Taiwan Microelectronics
Taiwan Microelectronics
登入
目前位置:
產品資訊 » 產品介紹 上一頁  |  下一頁     
搜尋產品
聯絡倢通

電話:(03)577-1098
傳真:(03)577-8539
email:sales@taiwanmicro.com.tw

 

電話:(03)577-1098
傳真:(03)577-8539
email:sales@taiwanmicro.com.tw

 

 

 

我們主要採用砷化鎵製程發展低成本、高頻、高功率、低雜訊之MMIC/MCM/SiP 以及各種混成電路模組,可協助顧客應用於無線通訊相關應用產品。

我們主要採用砷化鎵製程發展低成本、高頻、高功率、低雜訊之MMIC/MCM/SiP 以及各種混成電路模組,可協助顧客應用於無線通訊相關應用產品。

 
 
 

 
 

 

 

  Intelligent Bolt System 智慧螺絲
 
The system transmits the twisting message of the strain gauge to the controller (TCA) through 2.4GHz wireless transmission. Control the valve by the controller and control the screw lock. The CAP has a large battery embedded. When the screw is locked and the CAP can monitor the real time torque and clamping force as well as the bolting sequence throughout the bolting procedures. It can be used in vehicles, buildings, bridges and major equipment.
 

  TM1001 - 2.4GHz Power Amplifier IC with Power Detector
 

The TM1001 is manufactured on Gallium Arsenide Heterojunction Bipolar Transistor (GaAs HBT) process. The device is a low cost, high linearity, medium power, high efficiency amplifier IC designed for IEEE 802.11b/g, Bluetooth Class 1, and other application in the 2.4GHz ISM band. The device also features analog power control to optimize transmit power while maximizing battery life in portable equipment. The device includes an integrated power detector circuit for closed loop control of output power. The TM1001 is packaged in a compact 3mm by 3mm QFN package with a backside ground.

 

  TM1002 Low-Noise Amplifier with bypass switch for 2.3~2.7 GHz receiver applicati
 

 TM1002 Low-Noise Amplifier with bypass switch for 2.3~2.7 GHz receiver applications

TM1002是一個低雜訊放大器,適用在2.30~2.69GHz頻率之接收器應用,封裝在一1.1x0.7mmWLCSP封裝裏。TM1002提供適當之接收增益,優化系統,改善接收感度。它具有低雜訊、高線性度、功耗低等優點,在bypass模式下,電流消耗約1uA  

The TM1002 is a Low-Noise Amplifier (LNA) with bypass switch for 2.3~2.7 GHz receiver applications, available in a 1.1x0.7mm WLCSP. This product is only used in an over molded module. The TM1002 delivers system-optimized gain for both primary and diversity applications where sensitivity improvement is required. The high linearity of this low noise device ensures the required receive sensitivity independent of transmit power level in FDD systems. To lower power consumption it provides sufficient receive signal strength. The TM1002 can be switched off to operate in bypass mode at a 1μA current. The TM1002 requires only one external matching inductor. The TM1002 is optimized for 2300 MHz to 2690 MHz

 

  TM1005 - 4.95GHz~5.85GHz ISM Band Power Amplifier
 
The TM1005 is a high performance GaAs HBT IC amplifier that operates from 4.95 to 5.85GHz. This 3-stage amplifier provides 28 dB min small signal gain and 1-dB gain compression power output of +26 dBm. The input of the PA is matched to 50 ohms and the output can be easily matched for optimum linearity and power performance at the desired frequency of operation between 4.95GHz and 5.85GHz with one shunt capacitor. The part operates off a single+3.3V supply. At a 4.5V supply P1dB is 30 dBm with 28dB Gain. Applications include WLAN 802.11a, 5.8GHz Cordless Phone and HiperLAN2.
 

  TM1006 - 3GHz Low Noise Amplifier MMIC for GPS
 

The TM1006 is a low cost, low noise amplifier IC, designed for GPS (Global Positioning System) application in 1.57542GHz. The device is packaged in a compact 3mm by 3mm leadless package.

 

  TM1007 - 2.4GHz Power Amplifier MMIC
 

The TM1007 manufactured on Gallium Arsenide Heterojunction Bipolar Transistor (GaAs HBT) process is a low cost, high power, high efficiency amplifier IC designed for wireless data application at 2.4 to 2.5GHz ISM band. The device is packaged in a compact QFN 3mm by 3mm 16L package.

This high linearity device makes it ideal for IEEE 802.11.b/g, Wireless Data Terminal and portable battery powered equipment. The device also features analog power control to optimize transmit power while maximizing battery life in portable equipment with 200mW transmit power at antenna port. The power control function also eliminates the need for directional couplers, detector diodes and other power control circuitry. This allows the device to be directly driven by the DAC output.

 

  TM1008 - DC to 3GHz RF Transistor
 

The TM1008 is a low cost, low noise transistor. It can be designed for Low Noise Amplifier or Gain Block. This device is packaged in SOT343.

 

  TM1009 ~3Ghz Low Noise Amplifier MMIC in 1.5x1.5mm DFN package
 

TM1009是一種便宜且具有低雜訊的放大器的IC,設計為了GPS DVBPHSDECT等應用。 LNA是一具有兩級之微波集成電路(MMIC) IC具低雜訊可改善系統的敏感性,並且有非常低的電流消耗量,在攜帶式的設備最可最大化電池壽命。 IC封在1.5mmx1.5mm無鉛的DFN封裝裹。 

The TM1009 is a low cost and low noise amplifier (LNA) IC, designed for GPS, DVB, PHS and DECT applications in L Band. The LNA is implemented as a two stages monolithic microwave integrated circuit (MMIC) with current limiter on chip. The low noise figure of device improves the sensitivity of the system, and very low current consumption maximizes the battery life in portable equipment. The device is packaged in a compact 1.5mm by 1.5mm leadless package.

 


第 1 頁,總共 3 頁第一頁   上一頁   [1]  2  3  下一頁   最後一頁   

 

 

 

 

首頁  |  關於倢通  |  新聞專區  |  產品資訊  |  整合方案  |  聯絡倢通
新竹市308科學園區工業東九路七之一號二樓   電話:03-5771098   傳真:03-5778539
本站版權屬於倢通科技所有  |  核心技術:DNN  |  網站設計:意象科技